EN 
FR
ID
ES
AR
KO
RU
DE
N39400-Seria Kvar-Kanala Programebla DC-Elektroprovizo
N39400 series is a high-accuracy & multi-channel programmable DC power supply with standard 19-inch 2U design,available for rack installation. N39400 standalone supports Max. 4 channels output, with channels isolated. Both local operation on front panel and remote control on a computer are supported. N39400 can be widely used in lab test, system integration test, production aging line, etc.
ĉefa Elstaraĵoj
●Voltage range: 60V/150V
●Current range: 4A/6A/10A/15A
●Power range: 200W/360W/600W
●CC&CV prioritata funkcio
●Single device with up to 4 channels, each channel isolated
●Multiple protections: OVP, OCP, OTP and short circuit
●LAN port and RS232 interface
●Equipped with LCD screen and user-friendly interface
●Dual LAN ports design
Aplikaj Kampoj
● Lerneja laboratorio
● R&D-laboratorio
● Inspektado de linio de produktado
● Testo pri bontenado
Funkcioj kaj Avantaĝoj
Tre alta integriĝo, ununura aparato kun ĝis 4 kanaloj
N39400 series adopts the standard 19-inch 2U design, with Max.4 channels in a single device. Each channel is isolated.One device can support 4-station test simultaneously, which greatly reduces the test equipment quantity and improves test efficiency.
Remote kontrolo
N39400 series supports remote control, providing RS232 and LAN port to communicate with the computer, and realizing all functions on the panel via computer application software.
Remote sense
N39400 series provides remote sense function, which can transfer the actual voltage of the load back to N39400 so that N39400 can compensate for the output voltage and eliminate lead wire errors.
UI plataj ikonoj
UI-plataj ikonoj ofertas oportunan kaj rapidan funkciadon.
CC&CV prioritata funkcio
N39400 has the function of selecting priority of voltage-control loop or current-control loop, which enables N39400 to adopt the optimal test mode for different DUTs, and thus protect the DUT.
As shown in figure one, when the DUT requires reducing voltage overshoot during test, such as supplying power to a low-voltage processor or FPGA core, voltage priority mode should be selected to obtain fast and smooth rise voltage.
As shown in figure two, when the DUT requires reducing current overshoot during test, or when the DUT is with low impedance, such as battery charging scenario, current priority mode should be selected to obtain fast and smooth rise current.
Duoblaj LAN-havenoj por kontrolo de pluraj aparatoj
N39400 estas ekipita per du LAN-havenoj, kiuj povas subteni plurajn aparatojn kontrolon por rapida ĝustigo kaj testo.
